Underwater-Gear/Steering

Marine Hardware 1" Rudder Box Seal Kit

"MARINE HARDWARE" RUDDER RENEW KIT Fits 1998 (a few 1997) and UP Marine Hardware Rudders Only. Marine Hardware rudders will usually be stamped MH as the first 2 digits of the part number on the...

Control Cable, 17' Teleflex Extreme

This cable is now a Teleflex Extreme model. for use with inboard engines with appropriate accessories. 10/32 threads-Stroke: 3.4 (87 mm). Uravin cable seals. Nominal 3". Most Ski Nautique throttle...

20 Foot Rotary Steering Cable

Can be used to replace the 19-1/2 foot Morse cable used in 91-92 Correct Craft boats. Replaces Morse 304411-240 and 234 cables.  Uflex Rotary cables are a direct replacement for Morse Command...

20 Foot HPS Rack Steering Cable

High-Performance Marine Steering Featuring a Unique TFXTREME core steering cable delivers incredible response and minimal lo TELSSC15420 20' TELEFLEX (SEASTAR SOLUTIONS) RACK STEERING CABLE...

ROTARY SYSTEM 18 FOOT

Replaces Supra Boats 18 foot Steermaster cables used from 1984 thru 1988 (some exceptions). Uflex Planetary Helm & Cable, Standard 3/4" Tapered Shaft, aprox 3.8 Turns Lock To Lock. 90 Degree Bezel...

XPC BEARINGS 1 ID X 1-1/2 OD

*Low friction, vesconite material *Each bearing is 2" long, price includes 2.   INBOARD STRUT BEARINGS 1" ID X 1-1/2" OD Vesconite 100 thermoplastic material does not swell or soften, last up to 10...

XPC BEARINGS 1 ID X 1-1/4 OD

* Low friction, vesconite material * Each bearing is 2" long, price includes 2 * These are very sensative to the original bore of the strut and not recommended for Ski Nautiques. Usually they work   ...

Control Cable, 18'

For use with inboard engines with appropriate accessories. 10/32 threads-stroke: 3.4 (87 mm). Uravin cable seals. nominal 3"  Barefoot Nautique with 454 and most Supra Boats thru the 80's and 90's...

Rotary Tilt Helm Single Cable

Uflex Rotary tilt helm uses Prt # UFLX52 tilt and UFlex or Morse Command 290 Rotary Cables. Replaces Morse helm but you need the UFlex Tilt. Not compatible with the original Morder Tlit Column. Old...

21 Foot HPS Rack Steering Cable

High-Performance Marine Steering Featuring a Unique TFXTREME core steering cable delivers incredible response and minimal los TELSSC15421 21' TELEFLEX (SEASTAR SOLUTIONS) RACK STEERING CABLE...

ROTARY SYSTEM 20 FOOT

Uflex Planetary Helm & Cable, Standard 3/4" Tapered Shaft, aprox 3.8 Turns Lock To Lock. 90 Degree Bezel Included. A The Ultimate Rotary Steering Package. Benefits of a Planetary Gear Design...

ZINC, RUDDER 3-3/4

A sacrificial magnet to fight electrolysis in salt water and brackish water applications. 3-3/4" O.D. zink with stainless bolt/nut and copper bushing for permanent ground. Bin Number (ISBN): 101812  

Mach Zero 3300/33C High Efficiency Control Cable, 19 foot

Control cable used for throttle or shift in applications that call for a 19' cable.  Uflex replaces Morse or Teleflex. Throttle and Shift for most Mastercraft boats 1994 thru 2000 with GM engines...

XPC BEARINGS 1-1/8 X 1-3/8

* Low friction vesconite material  * Each bearing is 2" long, price includes 2.   Vesconite 100 thermoplastic material does not swell or soften, lasts up to 10 times as long as traditional materials...

SEAL KIT, SEF #1010-1 (1-1/8") RUDDER PORT

SEAL KIT, #1010-1 RUDDER PORT Fits SEF (South Eastern Foundries) 1010-1 (1-1/8" post) rudder port. Includes 2 lip seals, 2 O-rings, 1 snap ring, 1 plastic bushing, 2 set screws and 1 grease zerk...