Underwater-Gear/Steering

PROP WRENCH A.R.E.

Helps remove NYLOCK NUT and helps tighten the A.R.E. Prop Puller Bolt. TWO WRENCHES IN ONE!   A.R.E.’s chrome-plated prop wrench is laser cut from 1/4" steel and is offset for clearance. 3/4" end...

ACME SOFT CASE PROP SAVER W/C-CLAMP AND TOOLS

A must-have for your boat, this kit comes with everything you need to save a weekend on the water. Replace a damaged prop on the go with this weekend saver prop case from ACME.   Included in the...

OJ PROP KNOCKER

Economical option to the traditional prop puller.Simply screw it on in place of your prop nut and give it a knock with a hammer. It will jolt the prop loose from the shaft. Then, unscrew the knocker...

ACME PROP PULLER, C-CLAMP

Fits 1" and 1-1/8" shafts, long-lasting durable material. This Acme C Clamp Prop Puller Fits 1" and 1-1/8" shafts. Acme recommends using Lucas X-tra heavy-duty grease (or similar) on the puller...

Unique Prop Nut Wrench

What this wrench has to offer: - Install/Remove 7/8"-9 Prop Nut (1-1/4" Shaft) - Install/Remove 3/4"-10 Prop Nut (1" & 1-1/8" Shaft) - Install/Remove 1/2" NPT Drain Plug - Install/Remove 3/8" NPT...

BUSHINGS 1" I.D. X 1-1/4" O.D.

* Most Ski Nautiques, Inboard Supra's, Moomba's (not V-Drive), 1986 up Mastercraft with 1" shaft.* Formerly one long piece now sold in pairs for better water flow and easier installation (sold per...

Shift Knob Black

Standard MV2 & MV3 shift knob (70's, 80's, 90's original equipment) 3/8"-24 thread. BIN NUMBER (ISBN): 101409   OLD PART #TEL4009819

Connector Control Cable

Threaded connector for throttle or shift cable. MV2, MV3, and current with 10/32nd threaded cables. For the brass cotter pin click here. Item # 2437 Long: 23/32"   18.25MM (Usually used at the shift...

14 Foot Rotary Steering Cable

Uflex replacement cable for Morse Command 290 helms (Morse 304411-168 IN). Also fits Uflex T71 and T81 helms. Uflex Rotary cables are a direct replacement for Morse Command 290 Rotary cables Pt...

15 Foot HPS Rack Steering Cable

High-Performance Marine Steering Featuring a Unique TFXTREME core steering cable delivers incredible response and minimal lost motion. Replaces Teleflex part # SSC15415 backmount rack...

Steering Cable Only 14 Foot

Teleflex 14 foot QC II steering cable with adapter to fit Old style Teleflex helms (replaces SSC7214). Old Item # 427104

ROTARY SYSTEM 14' CABLE W/20 DEGREE BEZEL

Uflex Planetary Helm and Cable, standard 3/4" tapered shaft, aprox. 3.8 turns lock to lock. Includes 20 degree bezel for 84-86 Mastercraft Pro Star 190 (tilts the steering column up slightly). Old...

BUSHINGS 1" I.D. X 1-3/8" O.D

* Some Malibu, Mastercrafts, Ski Brendella, Ski Centurions prior to 1992 when they went to 1-1/8" shafts (sold per pair). Each bearing is 2" long, price includes 2.   Worn strut bearings increase...

Rudder Moomba/Supra Direct Drive

Fits all Supra direct drive boats like Comp, Conbrio, Sunsport, Etc. and most Moomba direct drives. This is the factory replacement rudder assembly from Skiers Choice. The rudder design has changed...

Stainless Steel w/red Shift Knob

Ongaro Red Grooves for Sight & Touch (1-1/2" dia.) 3/8"-24 threads. Fits Morse MV2, MV-3, Twin S, Twin SR, ST, and Teleflex CH5600 models Meets new ABYC requirements. This knob has a heavier feel...