Borg Warner Velvet Drive Transmissions

Sealing Ring

Sealing ring for Borg Warner velvet drive transmissions.

NUT MAIN SHAFT 1.52:1 RATIO

5" OD COUPLER, NOT RECOMMENDED TO REUSE THIS NUT. THIS IS FOR 1.52:1 REDUCTION GEARS.     Bin Number (ISBN): 1431

FWD & RVRS SHIFT LEVER

Forward & reverse shift lever 71 & 72C   Velvet Drive 71 & 72C forward & reverse shift lever (all ratios).

O'RING, BW SHIFT VALVE

Comon cause of a fluid leak at the shift lever.Shift valve must be removed for replacement, order Item #11006 NSS gasket.     1. REMOVE 3 BOLTS ON THE NSS. 2. REMOVE SHIFTER ARM. CAREFUL OF THE BALL AND SPRING BEHIND IT. 3. PUSH THE CONTROL...

BUSHING CARRIER ASSY BW 71/72

SOLD INDIVIDUALLY, order quantity 2.     Bin Number (ISBN): 51718

SPEEDY SLEEVE INPUT SHAFT 71 & 72C

Repairs damaged input shafts where the seal rides.   Bin Number (ISBN): 50218

SNAP RING 71C/10-17-XXX

Snap ring forward clutch cylinder bearing, sometimes it gets distorted upon removal (aprox. 1-5/8" OD).   Bin Number (ISBN): 122910  

CAP BREATHER ASSEMBLY

A vent in case of an overflow caused by overfilling.     Breather cap for Velvet Drive transmissions. Fits 71C, 72C and 5000 series transmissions  Replaces OEM Pt # A47406 Replaces Crusader # 1012714   Bin Number...

SPRING, PRESSURE PLATE 71/72C

Reverse pressure plate spring all 71/72C Velvet Drive. Length 1.21" (30.74 mm), diameter .29" (7.55 mm).   Bin Number (ISBN): 200458

O'RING NEUTRAL SAFETY SWITCH

For Use With Item # 1241 Penny for size comparison.    Bin Number (ISBN): 1242

NEUTRAL SAFETY SWITCH NEWER STYLE 80'S +

O-Ring Sold Separately Item #1242. Recommended each time you replace NSS. Fits Velvet Drive, PCM & ZF Hurth transmission (will not replace older style switch Item #1246).   MARINE NEUTRAL SAFETY SWITCH. O-ring sold separately...

NUT MAIN SHAFT 71C/72C 1:1 RATIO

4" OD COUPLER.   Bin Number (ISBN): 1430

REAR OIL SEAL (71C/72C) 1:1 RATIO

REAR OUTPUT SEAL 1:1 RATIO VELVET DRIVE   Bin Number (ISBN): 1407

OIL SEAL, FRONT PUMP

BORG WARNER TRANSMISSIONS, known for their smooth, Velvet Drive, have been the industry standard for decades. The 71C and 72C designations indicate input horsepower ranges. Typically, a 71C is found on small blocks and a 72C is used on big block...

SNAP RING KIT, BORG WARNER

BORG WARNER TRANSMISSIONS, known for their smooth, Velvet Drive, have been the industry standard for decades. The 71C and 72C designations indicate input horsepower ranges. Typically, a 71C is found on small blocks and a 72C is used on big block...