Drive Shaft Seals

GLIDE STRUT BEARINGS

No matter the brand or model, we have the strut bearings to fit your Ski/Wake boat ready to ship today!These 2” and 3" long bearings are sold in packs of two and won’t break the bank for a simple tune up.There are many different options you...

GLIDE REPLACEMENT SEAL KIT

The GLIDE replacement seal kits are compatible with any Glide Housing with the (6) screw cap.Included in the kit is a seal, install tool, and instruction sheet.

Glide Marine Seal System KIT

GMSS KITFor those ready to tackle the job of replacing your existing seal system on your own, we offerthe Glide Marine Seal System KIT. If you are looking to retrofit an older style stuffing box(packing nut) system or want to upgrade your current system,...

GLIDE DRIPLESS SHAFT SEALS

GLIDE Seal Systems are comprised entirely of our GLIDE-400 material and proudly made in theU.S.A. The housing is durable, lightweight, and non-corrosive. The lightweight housing reducesthe loaded weight on the shaft and seal, resulting in a better...

FLEX GLAND SHAFT SEAL SYSTEM 1"

Johnson Propellers dripless shaft sea for 1" driveshafts. Does not require a water supply from the engine. Also designed to provide more flexibility in the hose by eliminating the extended housing. Flex Gland Shaft Seal System 1" | Discount Inboard...

FLEX GLAND SHAFT SEAL SYSTEM 1-1/8"

Johnson Propellers dripless shaft seal for 1-1/8" shafts. It does not require a water feed from the engine. Also designed to provide more flexibility in the hose by eliminating the extended housing. Flex Gland Shaft Seal System 1-1/8" | Discount...

FLEX GLAND SYSTEM 1-1/4 GREEN

Johnson Propellers dripless shaft seal for 1-1/4" shafts. It does not require a water feed from the engine. Also designed to provide more flexibility in the hose by eliminating the extended housing. Flex Gland Shaft Seal System 1-1/4" | Discount Inboard...

PSS SEAL 1"

PSS Shaft Seal for 1" shafts, the PSS shaft seal is a replacement system for stuffing boxes. The PSS has no packing to adjust or replace and does not leak water into the bilge. Additionally, due to the simple design, the PSS requires no maintenance and...

PSS SHAFT SEAL 1-1/8"

Boats With 1-1/8" Drive Shaft and 1-3/4" shaft log.Includes water supply kit.Stainless steel rotor slides down the shaft and compresses the graphite faced bellows to make the seal. Please Note: This is a difficult installation on some Mastercraft...

ROPE PACKING 3/16"

* 3/16" Standard Wax Impregnated Flax Packing* Sold Per Foot Wax Impregnated Rope Packing for drive shaft and rudder stuffing boxes. One foot is usually enough to do a shaft log. You need to cut 3 individual peices that but connect and stuff each...

ROPE PACKING 1/4"

* Standard Wax Impregnated Flax Packing* Sold Per Foot Wax Impregnated Rope Packing for drive shaft and rudder stuffing boxes. Old Item #2004211

SHAFT PACKING DRIPLESS 3/16" X 2FT

* GFO Fiber Packing (Shaft - Rudder)* Easy To Install - Bilges Stay Dry* 3/16" packing is usually used with 1-1/8" shafts. 1" Shaft diameter exception: Most Correct Crafts thru 2001 used 3/16" until the 2002 Ski...

SHAFT PACKING DRIPLESS 1/4" X 2FT

Installed in the same manner as flax packing. GFO is a fiber packing that is 4 times more thermally conductive than flax. It needs virtually no sea water for lubrication or cooling and because it doesn't swell or shrink, leakage is controlled and kept to...

SEAL OJ NEW STYLE PLASTIC HOUSING 1

New seal and seal housing for the 1" OJ Flex gland shaft seal system.

1-3/4 SOFT WALL HOSE (SOLD PER FOOT)

1-3/4" Soft Wall Water Hose R045005 PLEASE NOTE: When ordering for shaft logs/stuffing boxes, please be sure to measure diameter of existing hose - some use 1-3/4" hose and some use 1-1/2 inch hose. For 1-1/2 inch hose, please order part...