Underwater Hardware

22 FOOT HPS Rack Steering Cable

Fits some late Model Malibu 24' boats.

Star Brite SILICONE SEALANT 2.8oz/ 100ML

Star Brite Brand marine sealant- 2.8oz/100ML bonds to fiberglass plastic, wood, glass, metal and more. For use above and below the water line. 

STRUT, MALIBU 14

STRUT, MALIBU 14

OJ LEGEND 14 X 16 LC 1 1/8" 3-BLADE

PROP VERSION: LEGEND DIAMETER: 14 PITCH: 16 BORE: 1-1/8" ROTATION: LH CUP: .090" BLADES: 3   ****NOTE: THIS IS A SPECIAL ORDER ITEM AND WILL TAKE A FEW DAYS TO SHIP

BEZEL 90 DEGREE KIT

90 Degree Steering Helm Mounting Bezel 

ADAPTER-TFLX SC TO C290 H

Converts old style cable (with the screw on nut) to the new style QC II or Morse 290 helm.   NO LONGER AVAILABLE   Bin Number (ISBN): 12811

18 CABLE MORSE COMMAND 200 RACK

sometimes found on 97 Ski Centurions. The Command 200 Rack helm is no longer available. Will not fit Teleflex rack helms.    Bin Number (ISBN): 110218

STRUT TIGE 15 DEGREE, 1-1/8

Tige 15 replacement strut with 1-1/8" bearinhgs. Tige 16 also available call for price and availabilty.   Bin Number (ISBN): 92420

STRUT 15 DEGREE (SEF 1051L) L=LONG SUNSPORT

Used on some Supras with 454 and 1" shaft. Also used on some direct drive Moombas with 1" shafts (not V-drive). Includes new strut bearings   *Careful, this is a SEF1051L, there is also an SEF1051 (C/O Outback and Boomerang) it's pt #103082 (not on...

STRUT, MALIBU 1997 UP

A few late 1996 models may have this 16 degree strut . The previous version was a 15.45 degree strut. Also fits Axis boats (but will say "Malibu" on the side). Will not fit XTI or FXI models, includes new strut bearings.   Bin Number...

STRUT, MASTERCRAFT 1986 UP 1-1/8 IN

8 Mounting holes 16 degree (Includes brass shelled rubber strut bearings). Fits 1986 up Mastercraft boats with powerslot or V-drive 1-1/8" shafts. Or, all 2003+ splined shaft. This is an aftermarket strut and will not have Mastercraft on the side...

STRUT, MASTERCRAFT 1986 UP 1"

This strut measures 7-3/4" high from mounting base to bottom of the barrel at the prop end. This is an aftermarket strut and will not have Mastercraft on the side. Note: Replacement strut bushing outside diameter will now be 1" X 1-3/8" no longer 1"...

STRUT MOOMBA/SUPRA 1-1/8 BORE 15 DEGREE

Most V-drive Supra and Moomba with 1-1/8" shaft, has SEF1050 (15 degree) stamped into side. Includes new strut bearings.     Superceeds 121306   Bin Number (ISBN): 60813

3/8"-16 X 3" STRUT BOLT (6-8 NEEDED DEPENDING ON STRUT)

Fits most Inboard ski boat struts. Sold Individually.

STRUT SUPRA 14 DEGREE, 1IN. SHAFT

Includes Bushings, Comp, Some Mariah's and older Sunsport's (Should be stamped with a 14).   Includes strut bushings, fits Supra Comp, some Sunsports and Maria's. Old strut should be marked with a 14 on the side, has a 6-1/2" drop. The distance...