ELECTRONIC CONVERSION/ MODULES

MODULE DELCO DISTRIBUTOR

MODULE, DELCO DISTRIBUTOR R116014 Electronic Module used with Delco distributors. No spark is a symptom that it needs replaced. Bin Number (ISBN): 62514  

IGNITION MODULE, MALLORY 50/57 SERIES

* Magnetic pick-up replacement module* Not for E-spark distributors (use MAA-6100M) Bin Number (ISBN): 21606  

IGN MODULE TFI GT-40

GT40 MULTI-PORT EFI TFI MODULE NOTE: replacement unit is only the module - you need to reuse the heat sink from your current one!! The module is attached using 2 5.5MM screws, just unscrew and replace the module from the heat sink.   Bin...

MALLORY IGNITION MODULE 6100M

Replacement Ignition Module for Mallory E-spark Distributors, if you are blowing these make sure your using resistance to the coil. Bin Number (ISBN): 52915  

BREAKERLESS IGN KIT IGNITOR II

MALLORY IGNITION KIT IGNITOR 2 PNX-9ML-181 Pertronix Ignitor II electronic conversion kit for Mallory 8 cylinder distributors (cap has clips that pivot with screws at the top). Pertronix recommends using the "Flame Thrower II" coil Item # 110510...

BREAKERLESS IGNITION KIT

PerTronix "Ignitor II" Electronic Ignition conversion kit for the Prestolite clip down cap and screw-down cap.  Works great in stock point-type distributors as a trigger for multi-spark CD ignitions  Lobe Sensor Solid-State, Hall Effect,...

ECM, MODULE GT40 5.8L

NOTE: CORE RETURN REQUIRED: We will include a label to return your old ECM   These are re-programmed Ford ECMs calibrated for the PCM GT-40 MEFI engines. These are not new! But tested and re-programmed Ford units. They have a 6 Month warranty...