FRESH WATER COOLING

END CAP, HEAT EXCHANGER (5")

END CAP, HEAT EXCHANGER (5")   gasket sold separately- RM0167

HEAT EXCHNGR, FORD GT40

PCM Original Equipment for GT40 (351 EFI 310hp) Also used on all Sea Maxx (351 EFI 310hp). Not used on GM engines.   Bin Number (ISBN): 33009  

HEAT EXCHANGER FWC 302/351

302 AND 351 Carbureted (NOT GT40 EFI or SEA MAXX 351 EFI 310 hp engines) single pass.  Bin Number (ISBN): 101707

TANK COOLANT RECOVERY F/W

TANK COOLANT RECOVERY F/W For Indmar engines

GASKET, END CAP 5

PCM, Crusader Heat Exchanger end cap gasket (measures 4-3/4")  

ANODE ZINC 1/4

All PCM/SeaMaxx Ford GT40 EFI and 302/351Carbureted. Most PCM/SeaMaxx GM 5.7, 5.0L, 7.4L, 8.1L, 8.2L. (Not 6.0L) Bin Number (ISBN): 90108

ANODE ZINC 1/8

ANODE ZINC 3/8in. NPT

PCM 6.0L, ZR6, ZR409 also Replaces Indmar Pt # 86-5055.   Bin Number (ISBN): 90308

ZINC, HURTH SKI V TRANS

2007 UP INDMAR SKI V TRANSMISSIONS, SOLD INDIVIDUALLY (2 REQUIRED).   Bin Number (ISBN): 91211

Pencil Anode Zinc 3/4 NPT X 1"

Normally found on coastal series with fresh water cooling. Bin Number (ISBN): 102021

ZINC, RUDDER 3-3/4

A sacrificial magnet to fight electrolysis in salt water and brackish water applications. 3-3/4" O.D. zink with stainless bolt/nut and copper bushing for permanent ground. Bin Number (ISBN): 101812  

ZINC, BARRELL, 1-1/8 SHAFT

Barrel collar for 1-1/8" shaft. Allen screw held in by washer with stainless nut cast in, copper contact for permanent ground.   Bin Number (ISBN): 102012

ZINC, BARRELL, 1 SHAFT

Barrel collar for 1" diveshaft. Allen screw held in by washer with stainless nut cast in, copper contact for permanent ground.   Bin Number (ISBN): 101912