Engine

GSKT INTAKE SET 305/350 GM THRU 86 SB

GSKT INTAKE SET 305/350 GM THRU 86 SB Marine gaskets are highly recommended over standard automotive gaskets for top efficiency, safety and performance! Minor wear, warpage and corrosion are a fact of life on marine engine surfaces. You can rely on...

TIMING COVER GM 305/350

TIMING COVER GM 305/350 Thru 1996, Not for use with Plastic Timing Cover (97 up). Marine gaskets are highly recommended over standard automotive gaskets for top efficiency, safety and performance! Minor wear, warpage and corrosion are a fact of life on...

BOLT SPARK ARRESTER

Fits Holley 4160 Carb. May have to cut a little of the length if not using a plastic cover on the flame arrestor (1/4" 20 X 2"). Bin Number (ISBN): 0424

Cylinder Head Gasket Ford 351 & 302 PCM & Indmar (sold individually)

Cylinder Head Gasket Ford 351 & 302 PCM & Indmar (sold individually) The same gasket for either head but one side must be flipped over for proper installation. Make sure to have the front marking pointed forward. When properly installed both...

Prestolite Clip Down Distributor Cap Gasket RM0118

Prestolite Clip Down Distributor Cap Gasket RM0118 Distributor cap gasket Prestolite/Mallory clip down cap (clips with screws at the base) 70's thru part of 1987. Also fits the newer Mallory distributors that require a gasket. The Mallory 209 cap now...

PLENUM COVER GASKET MCX, LTR, MONSOON

PLENUM COVER GASKET MCX, LTR, MONSOON INDMAR UPPER PLENUM GASKET, LTR , MCX, NEWER MONSOON ENGINES WITH LARGE ALUMINUM INTAKE PLENUM. INDMAR PT # S76-5003. A plenum connects the intake to the air filter and throttle body.   Bin Number (ISBN):...

INTAKE MANIFOLD GASKET UPPER TO LOWER PCM GT-40

FORD GT40 PLENUM GASKET INTAKE MANIFOLD GASKET UPPER TO LOWER PCM GT-40   Bin Number (ISBN): 1161

ADAPTER CARB FITTING

Inlet and outlet sides pictured. Normally there is not a filter located here just a screen. Metal gasket RN0032 sold separately.   Bin Number (ISBN): 0433  

ECM, MODULE GT40 5.8L

NOTE: CORE RETURN REQUIRED: We will include a label to return your old ECM   These are re-programmed Ford ECMs calibrated for the PCM GT-40 MEFI engines. These are not new! But tested and re-programmed Ford units. They have a 6 Month warranty...

TANK COOLANT RECOVERY F/W

TANK COOLANT RECOVERY F/W For Indmar engines

FLEXIBLE FUEL LINE W/FITTINGS

Flexible Fuel Line Ford 302 351 W/Fittings DIMRPFL Ford 302, 351 mechanical fuel pump to Holley 4160 Marine carburetor. Works with any clock position on the fuel pump. Includes a nice quality aluminum fitting and gasket for carb and brass 90 for...

COVER FLAME ARRESTOR

PCM Ford With Holley 4160 (Not Pro-Tec)Does not include decal. Can also be used on most Indmar carbureted engines. Bin Number (ISBN): 5129

FLAME ARRESTOR, 2 VENT

Flame Arrestor 2 Hoses R145011 Fits: Holley 4 Barrel Carb Aluminum 2.5"x7" 2 Vents Flame Arrestor 2 Hoses R145011   SMALL HOSE TO THE MECHANICAL FUEL PUMP, LARGE HOSE TO VALVE COVER 2.5" H X 7" Dia. Fits flush to carb (no...

FLAME ARRESTOR, 1 VENT

Flame Arrestor 1 Vent R145017 Used from 92 and up when Holley started putting a fuel pump vent connection on new carbs. Measures 2-1/4" H X 7" OD and the bottom flange fits flush with the carb. Bin Number (ISBN): 30819

FUEL LINE PCM 302/351

Metal Fuel Line Assembly PCM Ford 302 351 RA085002B: Fits: Holley 4160 to OEM PCM Fuel Pump. Can be used on Indmar Fords when replacing OEM fuel pump with PCM pump. Indmar OEM fuel line for 4160 is NLA. Metal Fuel Line Assembly PCM Ford...