Engine

TIMING COVER GM 305/350 ALL THRU 1996

TIMING COVER GM 305/350 METAL COVERS Thru 1996, Not for use with Plastic Timing Cover (97 up). Marine gaskets are highly recommended over standard automotive gaskets for top efficiency, safety and performance! Minor wear, warpage and corrosion are a fact...

BOLT SPARK ARRESTER

Fits Holley 4160 Carb. May have to cut a little of the length if not using a plastic cover on the flame arrestor (1/4" 20 X 2"). Bin Number (ISBN): 0424

Cylinder Head Gasket Ford 351 & 302 PCM & Indmar (sold individually)

Cylinder Head Gasket Ford 351 & 302 PCM & Indmar (sold individually) The same gasket for either head but one side must be flipped over for proper installation. Make sure to have the front marking pointed forward. When properly installed both...

Prestolite Clip Down Distributor Cap Gasket RM0118

Prestolite Clip Down Distributor Cap Gasket RM0118 Distributor cap gasket Prestolite/Mallory clip down cap (clips with screws at the base) 70's thru part of 1987. Also fits the newer Mallory distributors that require a gasket (the Mallory 209 cap now...

PLENUM COVER GASKET MCX, LTR, MONSOON

PLENUM COVER GASKET MCX, LTR, MONSOON INDMAR UPPER PLENUM GASKET, LTR , MCX, NEWER MONSOON ENGINES WITH LARGE ALUMINUM INTAKE PLENUM. INDMAR PT # S76-5003. A plenum connects the intake to the air filter and throttle body.   Bin Number (ISBN):...

INTAKE MANIFOLD GASKET UPPER TO LOWER PCM GT-40

FORD GT40 PLENUM GASKET INTAKE MANIFOLD GASKET UPPER TO LOWER PCM GT-40 PCM RM0236Pleasure Craft Marine 351 Plenum gasket for Ford Gt-40 engines (MEFI)  Bin Number (ISBN): 1161

ADAPTER CARB FITTING

Inlet and outlet sides pictured. Normally there is not a filter located here just a screen. Metal gasket RN0032 sold separately.  Fuel line to adapter is 5/8"X18 Inverted flare and carb side is a 7/8-20 thread.  Bin Number (ISBN):...

TANK COOLANT RECOVERY F/W

TANK COOLANT RECOVERY F/W For Indmar engines

FLEXIBLE FUEL LINE W/FITTINGS HOLLEY 4160

Flexible Fuel Line Ford 302/351 W/Fittings, will also work with GM 5.7 and Electric Fuel Pumps. Ford 302, 351 mechanical fuel pump to Holley 4160 Marine carburetor. Works with any clock position on the fuel pump. Includes a nice quality aluminum...

COVER FLAME ARRESTOR

PCM Ford With Holley 4160 (Not Pro-Tec)Does not include decal. Can also be used on most Indmar carbureted engines. Bin Number (ISBN): 5129

FLAME ARRESTOR, 2 VENT

Flame Arrestor 2 Hoses R145011 Fits: Holley 4 Barrel Carb Aluminum 2.5"x7" 2 Vents Flame Arrestor 2 Hoses R145011   SMALL HOSE TO THE MECHANICAL FUEL PUMP, LARGE HOSE TO VALVE COVER 2.5" H X 7" Dia. Fits flush to carb (no...

FLAME ARRESTOR, 1 VENT

Flame Arrestor 1 Vent R145017 Used from 92 and up when Holley started putting a fuel pump vent connection on new carbs. Measures 2-1/4" H X 7" OD and the bottom flange fits flush with the carb. Bin Number (ISBN): 30819

FUEL LINE PCM 302/351

Metal Fuel Line Assembly PCM Ford 302 351 RA085002B: Fits: Holley 4160 to OEM PCM Fuel Pump (6 o'clock outlet from side of engine). Can be used on Indmar Fords when replacing OEM fuel pump with PCM pump. Indmar OEM fuel line for 4160 is NLA. Metal...

FILTER FUEL ELEMENT FRAM LONG

Long Fuel Filter (CCS1136) Fits: Most Correct Craft thru the 80's. Original Fram brand replacement filter. Housing Is Around 8" in height Bin Number (ISBN): 102619     OLD PART #: WIX33436

FILTER FUEL ELEMENT SHORT

Fram Fuel Filter Element C1110PL 33110 Fits: Older Carbureted PCM Engines. Common in older 80's and early 90's Mastercraft and Supra Boats Bin Number (ISBN): 102419     OLD PART NUMBER : WIX33110