Shaft Accessories

FLEX GLAND SYSTEM 1-1/4 GREEN

Johnson Propellers dripless shaft seal for 1-1/4" shafts. It does not require a water feed from the engine. Also designed to provide more flexibility in the hose by eliminating the extended housing. Flex Gland Shaft Seal System 1-1/4" | Discount Inboard...

ZINC, RUDDER 3-3/4

A sacrificial magnet to fight electrolysis in salt water and brackish water applications. 3-3/4" O.D. zink with stainless bolt/nut and copper bushing for permanent ground. Bin Number (ISBN): 101812  

ZINC, BARRELL, 1-1/8 SHAFT

Barrel collar for 1-1/8" shaft. Allen screw held in by washer with stainless nut cast in, copper contact for permanent ground.   Bin Number (ISBN): 102012

ZINC, BARRELL, 1 SHAFT

Barrel collar for 1" diveshaft. Allen screw held in by washer with stainless nut cast in, copper contact for permanent ground.   Bin Number (ISBN): 101912

SEAL ONLY, 1-1/4" OJ/XPC

OJ dripless systems with 1-1/4" shafts that are held in with a snap ring (some Nautique G series boats). IF you have the Glide GMSS with the 6 SCREWS USE GBS1250.   Bin Number (ISBN): 110215

Shaft Log 98 up Nautique

Shaft Log, 1998-on   1 7/16 ID 1 3/4 OD

4" SINGLE TAPER COUPLER 1 BORE

For 1" diameter shafts that are only tapered on the prop end. This should be an interference/press fit onto the shaft. This coupler is usually used with a 1:1 ratio transmission.     OLD PART # CPST4X1.0   Bin Number (ISBN): 33005