Underwater Hardware

ACME 541 13.00" X 12.00" PROPELLER 3-BLADE LEFT HAND

Prostar 190, Moomba, Supra, Malibu Prior to 92, with 1:1 Trans. This prop has similar RPM to a hand-finished 13 X 13. Diameter: 13.00" Pitch: 12.00" Cup: .080" Hub Length: 02.750" Bore: 1.00" Blades: 3 Blade Rotation: Left   Bin Number (ISBN):...

ACME 543 13.00" X 11.50" PROPELLER 3-BLADE LEFT HAND

Aprox 150 More RPM Than #541, (1000lbs Ballast)Diameter: 13.00"Pitch: 11.50"Cup: .080"Hub Length: 02.750"Bore: 1.00"Blades: 3 Rotation: Left Hand   Bin Number (ISBN): 60105     **THIS IS A SPECIAL ORDER ITEM. **

13 X 11.5 (.080C) RH 3 BLD 1

Aprox 150 More RPM Than #540, (1000lbs Ballast)Diameter: 13.00"Pitch: 11.50"Cup: .080"Hub Length: 02.750"Bore: 1.00"Blades: 3Rotation: Right   Bin Number (ISBN): 60205

13 X 10.5 (.080C) LH 3 BLD 1'' BORE PROP

Good For Full Ballast (1500 lbs+) or High altitude Diameter: 13.00" Pitch: 10.50" Cup: .080" Hub Length: Bore: 1.00" Blades: 3 Rotation: Left   Shop the ACME 913 13.00" x 10.50" Propeller 3-Blade Left Hand Here at Discount Inboard Marine...

13.25 X 15 (.090C) RH 3 BLD 1

89-96 Nautique - Turns Less RPM Than #470Diameter: 13.25"Pitch: 15.00"Cup: .090"Hub Length: 02.750"Bore: 1.00"Blades: 3Rotation: Right   ACME 1442 13.25" x 15.00" Propeller 3-Blade Right Hand   Bin Number (ISBN): 21408

12.5 X 15 (.150C) 3BLD RH 1

Diameter: 12.50"Pitch: 15.00"Cup: .150"Bore: 1.00"Blades: 3Rotation: Right   Same as 470 with more cup, rpms about the same as Acme 422 (4bld).     Bin Number (ISBN): 41311

12.5 X 12 (.080C) RH 3 BLD 1

Ski Tique and Mustangs with minimum hull clearance. This is basically a cut down Acme 540 that wont blister or hit the hull.Diameter: 12.50"Pitch: 12.00"Cup: .080"Hub Length: 02.750"Bore: 1.00"Blades: 3Rotation: Right   ACME 1210 12.50" x 12.00"...

12.5 X 15.5 RH (.150C) 4 BLD 1

Diameter 12.5" Pitch 15.5" Cup .150" Shaft 1" - Compare to Right Hand 422 prop of .105 cup    

Splined Steering Wheel Hub

Splined hub for use with UFLEX steering wheel. Needed for some Mastercraft and Nautique boats with splined shaft tilt column.  Old Item # 121009

Teleflex Helm, Backmount Rack

For 1996 And Up Teleflex rack cables. Fits both splined and tapered Teleflex Tilt Units. 93-97 Correct Craft can use this helm with a 98 and up 20 foot rack cable Item #TELSSC15420. Fits Teleflex rack cables SSC134XX and SSC154XX.

Tilt Helm, Teleflex QC II Rotary

"Safe-T" Rotary Helm compatible with Teleflex SH91500P/SH91700P tilt assemblies. Telelflex Pt#SH91523P. Three turns lock to lock. Uses the newer style quick connect Teleflex Rotary cable and does not need the adapter.  

Teleflex Tilt Mechanism Splined Shaft

Performance" Teleflex - Some Mastercraft & 93 up NautiquesThe steering wheel shaft is splined and not keyed. Also used on some late-model Nautiques. It Will not fit Morse Helm. Old Item # 121009  

Teleflex Tapered Shaft Tilt Assembly

"Performance Series" Fits Teleflex Rotary or Rack Tilt helms. Fits the late model TELEFLEX Helms and has a tapered shaft for the steering wheel. Has a tilt mechanism with flexible bellows and a 3/4" tapered shaft. This product requires a tilt helm...

Clamp Block , Steering Cable

Clamp block kit with 2-1/2" standoff, used on most tournament style inboards with Teleflex and Steermaster cables. Old Item # 2404.

SYSTEM SOCKET 1.25

1-1/4" Socket With Wrench Flats. Most Mastercraft original equipment driveshaft, with Marine Hardware driveshafts.   The ARE retaining nut socket with wrench flats requires only 1" clearance to fit between the transmission and the coupling...