4 BLADE NIBRAL CNC

13 X 12.5 (.105C) RH 4 BLD 1

Diameter: 13.00"Pitch: 12.50"Cup: .105"Hub Length: 02.750"Bore: 1.00"Blades: 4Rotation: Right   ACME 480 13.00" x 12.50" Right Hand Propeller 4-Blade   Bin Number (ISBN): 2004154

ACME 644 OR POWERTECH F44 PROPELLER 13.25 X 16 (.105C) RH 4 BLD 1-1/8

Correct Craft V-Drive Super Air Team, 210, 220, 226 UP TO 2005.NOTE: The 2006 and newer 210 became a Left-Hand Rotation! It Uses Acme #645 along with 2007 up boats with PCM V-drive.Diameter: 13.25"Pitch: 16.00"Cup: .105"Hub length: 02.750"Bore: 1...

14.5 X 14.25 (.105C) RH 4 BLD 1-1/8

Correct Craft - Improved holeshot and better fuel economy when running extra ballast.Not For Nautique 210, Acme recommends #1578, 13.5 X 14.25 for hull clearance.Diameter: 14.50"Pitch: 14.25"Cup: .105"Hub length: 02.750Bore: 1.125"Blades: 4Rotation:...

13 X 15.5 RH 4 BLD 1-1/8

This works fine with a PCM 1.23:1 gear but would need a bore reducer for 1" shaft. Fits 1989 Fish Nautique with 1.23:1 gear. Nautique Exel with PCM 454 (will increase RPM about 400).Diameter: 13.00"Pitch: 15.50"Cup: .090"Hub length: 02.750"Bore: 1...

ACME 2561 OR POWERTECH BE61 17.00" X 17.00" PROPELLER 4-BLADE LEFT HAND

The ACME 2561 4 Blade 17" x 17" Propeller is designed for use on Nautique G-Series boats equipped with a 2:1 reduction v-drive and 1-1/4" prop shaft. This started in 2014 and was typically the ZR409 and ZR450 engines. The 550 Super Charged did...

13.5 X 17.5 LH 4 BLD 1-18

Powerslot or V-Drive LH rotation, Also available splined for MC.Diameter: 13.50"Pitch: 17.50"Cup: .105"Hub length: 02.750"Bore: 1.125"Blades: 4Rotation: Left   ACME 4-Blade Inboard Ski Props. Revolutionary state-of-the art CNC Machined Nibral...

ACME 2315 15.00" X 12.00" PROPELLER 4-BLADE LEFT HAND

Heavily weighted v-drive, wake surf or wakeboard running 3000 to 4000 lbs. ballast.Diameter: 15.00"Pitch: 12.00"Cup: .105"Hub length: 02.750"Bore: 1.125"Blades: 4Rotation: Left   Bin Number (ISBN): 11513

ACME 1235 OR POWERTECH AB35 14.50" X 14.25" PROPELLER 4-BLADE LEFT HAND

Hot Wakeboard prop, faster to plane and better fuel economy when running extra ballast. (1.5:1 Ratio Transmissions)Supra, Moomba, Malibu, MB, Mastercraft thru 2002, Correct Craft 2007 up (not 210). V-drive boats with 1.5:1 ratio.Diameter: 14.50"Pitch: 14...

ACME 1617 14.00" X 13.75" PROPELLER 4-BLADE LEFT HAND

2007.5 UP Nautique 210 WEIGHTED (PCM V-DRIVE)Diameter: 14.00"Pitch: 13.75"Cup: .105"Hub length: 02.750"Bore: 1.125"Blades: 4Rotation: Left   Bin Number (ISBN): 52615

ACME 380 13.50" X 17.50" PROPELLER 4-BLADE RIGHT HAND

V- DRIVE NAUTIQUE (Non-ballast prop) if you have a "Team Edition" use #644.Diameter: 13.50"Pitch: 17.50"Cup: .105"Hub length: 02.750"Bore: 1.125"Blades: 4Rotation: Right   Bin Number (ISBN): 52205

ACME 537 13.50" X 16.00" PROPELLER 4-BLADE LEFT HAND

V-Drive 1.5 Gear, 1000 lbs Ballast, Wakesetter VLX, X-10, X-30, Supra/Moomba V, MB VDRV. Good for heavy loads.Diameter: 13.50"Pitch: 16.00"Cup: .105"Hub length: 02.750"Bore: 1.125"Blades: 4Rotation: Left   Bin Number (ISBN): 2035

13.5 X 14.25 (.105C) RH 4 BLD 1-1/8 Prop

Super Air Nautique 210 with full ballast, right hand rotation thru 2005, not for 2006 and up 210 with PCM V-drive. Max's out rpm's at about 35 mph. Superceeds Acme Pt#1464.Diameter: 13.50"Pitch: 14.25"Cup: .105"Hub length: 02.750"Bore: 1.125"Blades:...

13.5 X 14.25 (.105C) RH 4 BLD 1-1/8

Super Air Nautique with full ballast, right-hand rotation thru 2005, not for 2006 and up with PCM V-drive. Max's out rpm's at about 35 mph. This prop has been superseded by Acme # 1578. But we have a #1464 in stock at a reduced price!Diameter: 13...

ACME 1579 13.50" X 14.25" PROPELLER 4-BLADE LEFT HAND

Fully loaded wakeboard or surf using max ballast and people. (Replaces Acme #1465). This prop tops out at about 36 mph and is designed for full ballast. Click on the photo for more details.Diameter: 13.50"Pitch: 14.25"Cup: .105"Hub length: 02.750"Bore: 1...

ACME 645 OR POWERTECH F45 13.25" X 16.00" PROPELLER 4-BLADE LEFT HAND

ACME 645, 4 Blade, Left Hand Rotation Prop (13.25" X 16" X 1-1/8" bore) for 2006 Nautique 210, and 2007 - on V-Drive boats using PCM Vdrive (210, 220, SV211, 230, etc) including:  GS 20. Replaces 381 for additional pulling power...