SENDERS/ SWITCHES/ ACCESSOR

ENGINE ALARM WITH AUDIBLE WARNING

Audible warning system for engine temperature and oil pressure. Keep your engine safe this summer. Works on Ford or GM older applications without alarms, EFI, or Carburated.  Oil pressure switch set a 6psi and temp switch set at 200...

NEUTRAL SAFETY SWITCH

No O-Ring Required. Used up to late 1970's. Old style 1-1/8" size wrench, used up to late 1970's. Bin Number (ISBN): 1246

WATER TEMP SENDING UNIT

PCM 302, GT40 in circulation pump, Some Mercruiser (pt # 806490T), Early LT1 in the T-stat housing then moved to cylinder head around 95 (tapered threads are aprox. 3/4" in diameter). Also used in some PCM GM engines around 2002-05 located in the T-stat...

WATER TEMP SENDER R020003 FORD PCM INDMAR - SOME GM (1/2 NPT).

Fits: PCM Ford, INDMAR Ford, Some PCM GM, Crusader Exception 1. PCM GT40 351 EFI uses Item# R020002 located in the circulation pump. Exception 2. Does NOT Fit: 2007 up PCM.  Exception 3. Not for LT1 use...

KNOCK SENSOR GM

Knock Sensor 5.0/5.7 GM OEM R020027: Fits:GM 5.0/5.7L TBI, MPI 1994 up thru 2005 Indmar and 2007 PCM (Also used after 2005 on some PCM 5.7 engines). Does NOT Fit: 454, 2006 up Indmar post mount sensor, 2008 up PCM with post mount knock...

OIL PRESSURE SENSOR PSI 6.0/6.2 LSA DIGITAL

Oil Pressure Sensor (PSI) for 6.0/6.2 Chevrolet marine engines LSA Digital, Pleasurecraft Engines. Used on 6.0L engines from 2011 thru 2019, has a different connector from Indmar. Bin Number (ISBN): 42117  

Water Temperature Switch to '95

PCM EEMS Pro Tec Ignition 1989-1995, 3/8" NPT (Actual Diameteter aprox 5/8") * 210 Degree (Limp Home). MARINE PCM PRO TEC WATER TEMP SWITCH. ALSO USED IN SOME INDMAR LT1 CYLINDER HEADS (FOR ALARM). Bin Number (ISBN): 80707  

INDMAR DIGITAL OIL PRESSURE SENDER 55-1379

Indmar Digital Oil Pressure Sender. Indmar did not use until 2007 or so. The oil pressure sender is an important component of the engine, as it helps to ensure that the oil pressure is maintained at the correct level. If the oil pressure...

SWITCH, IGNITION, 3 POSITION-CHROME NUT

3 position switch - Ignition any boat with standard 3 wire hook up. 

SWITCH OIL PRESSURE

PCM Pro Tec Ignition 1989-1994, GT40 All, GM 5.7. Replaces older style switch that was smaller in size. Will not fit/replace 2007 and up PCM Digital sender or 2006 and up Indmar. MARINE PRO TEC OIL PRESSURE SWITCH. Switch goes to ground to put engine...

WATER TEMP SENDER R020019

Sending Unit for the ECM, most GM 2 wire snap in connector, 3/8 NPT. Indmar Pt# 556013, later model LT1 screws into the T-stat housing (instead of 1 wire sender). Bin Number (ISBN): 2004202

ENGINE KILL SWITCH SAFETY CORD ONLY

TETHER CORD ONLY, ENGINE CUT OFF (KILL) SWITCH.

EMERGENCY CUT-OFF SWITCH /KILL SWITCH

Emergency cut off switch to comply with the new coast guard mandate which means no pesky tickets. 4 Prong Wiring Connector. developed to meet the needs of boaters everywhere. In an emergency, a quick pull on the 3-foot coil lanyard stops the engine,...

NEUTRAL SAFETY SWITCH NEWER STYLE 80'S +

O-Ring Sold Separately Item #1242. Recommended each time you replace NSS. Fits Velvet Drive, PCM & ZF Hurth transmission (will not replace older style switch Item #1246).   MARINE NEUTRAL SAFETY SWITCH. O-ring sold separately...

O'RING NEUTRAL SAFETY SWITCH

For Use With Item # 1241 Penny for size comparison.    Bin Number (ISBN): 1242