INDMAR

THERMOSTAT 143 DEGREE FORD PCM & INDMAR R026002E

Thermostat 143 Degree Indmar ford R026002E: Fits: PCM/Indmar Fords, LT1 T-Stat Housing. Also, many raw water cooled Crusader marine engines  Gasket sold separately. OEM Get this OEM Thermostat 143 Degree Indmar ford R026002E from...

THERMOSTAT KIT, 160 DEGREE - MOST 98 UP INDMAR

Thermostat OW Profile HS 160 Degree- Indmar with gaskets. This kit has the upper gasket for the new style housing that 1998 and up Malibu's used.  Some Mastercraft still used the old style housing after 1998 with the trianguler upper gasket PT...

Thermostat 160 Degree Ford/GM PCM Indmar

THERMOSTAT 160 DEGREE PCM/Indmar Fords R026002: Fits: PCM/Indmar Fords, Indmar GM, 98 up PCM GM Raw Water Cooled and ZR6/409 Fresh Water Cooled. Indmar 5.7L Will NOT Fit: Indmar 6.0L (LS7). Gasket Sold Separately. LT1 uses this one in the upper...

GASKET T-STAT COVER NMR TRIANGULAR

ALL FORD AND CHEVY THRU 97 AFTER 98 IT COULD BE ITEM # 0731. This gasket was still used on the carb and TBI engines past '97 thru 2002, i.e. Preditor all LT1 THERMOSTATS can fail and should be tested or replaced if questionable. The type of thermostat...

GASKET, TSTAT COVER GM Indmar 98+ MONSOON

Shaped like a baseball field used on most PFI, Multi Port, EFI 1998 UP. (Not for 2007 up Catalyst Exhaust engines with 2 bolt housing, use Item # 0739). Bin Number (ISBN): 0731

THERMOSTAT 160 Deg GEN4 6.0L

GEN 4 160 degree thermostat (LY6, LS2, L96, LS3, LSA, raw water cooled engines)

T-STAT LT1 160

THE 160 GOES IN THE INTAKE MANIFOLD.Item # 91608 rubber seal sold separately.The drilled thermostat is also used in Indmar Fresh Water Cooled engines. Indmar LT 1 engines use 2 thermostats, the 160 goes in the intake manifold (like a car) and a 143 in...

THERMOSTAT 160 DRILLED LY6 -(5/32)

160 degree thermostat used on L96, LY6 closed cooled engines.

THERMOSTAT 160 DEGREE 6.2L

THERMOSTAT 160 DEGREE 6.2L

O-RING SEAL FOR THERMOSTAT HOUSING LT1

Use with LT1 Thermostat, the t-stat installs into the center groove of the o-ring so the ring and T-stat become one piece   Bin Number (ISBN): 91608

THERMOSTAT HOUSING ASSEMBLY INDMAR GM OLD STYLE

Old style Indmar GM triangular thermostat housing includes a 143-degree thermostat. Fits 5.7 and 454. Requires 2 hose barbs not Included part #60-5008 and also requires one housing gasket RM0121. Bin Number (ISBN): 81114  

GASKET THERMOSTAT HOUSING TO INTAKE GM

Gasket Thermostat Housing To Intake GM RM0121: Fits: Fresh and R/W cooled PCM (Lower). Indmar 2007 and up with 2 bolt housing (catalyst engines). All Indmar GM TBI and carbureted. Bin Number (ISBN): 0739  

INDMAR 351W MARINE THERMOSTAT HOUSING FORD

BARR Indmar Ford 302/351 Thermostat Housing. You will also need 2 hose barrbs item #200450, Includes 142-degree thermostat. Does Not Include Mounting Gasket Item #0725. Old Item # 82817

THERMOSTAT HSG KIT, NMR GM

New style GM housing (3 bolt). 1998 and up MPI (exception being some TBI used old triangular style housing thru 2002). Bin Number (ISBN): 30712              Base gasket sold separately (click...

GASKET, T-STAT 6.0L, H5 & H6 PCM/ Some INDMAR

PCM ZR6, PCM ZR409, 6.0L requires 2 gasket one on each side of the retainer plate