R/W PUMP PARTS/GASKETS

O'RING IMPELLER

O'RING IMPELLER     Bin Number (ISBN): 0724

Seal and Oring Kit Johnson Pump

Seals The Pump Housing To Shaft (Indmar)Open side faces impeller, closed or solid side towards bearing. If your pump is leaking from the back side it is normally caused by this seal being worn or deformed. Be carefull when removing or installing your...

GASKET, IMPELLER (1 REQUIRED)

JABSCO R/W PUMP, MERC PT # 27-805215-1 GASKET FOR END CAP.

GASKET, IMPELLER SHERWOOD

PCM Belt driven pumps 2002-2003.

GASKET, IMPELLER JABSCO (2 REQUIRED)

JABSCO R/W PUMP, MERCThis is the proper gasket for the Jabsco Water Pump end cap (Item # 0605)

GASKET, IMPELLER JOHNSON

INDMAR PT#68-5008 FIT JOHNSON CRANK DRIVEN PUMP USED ON FORD AND GM ENGINES. ITEM # 0723

GASKET FOR SHERWOOD RAW WATER PUMP

Fits all PCM Sherwood pumps. Replaces Universal 302879 Gasket. Note: Will NOT fit older Sherwood Interceptor pumps (use SHE10103).   Item # 0622

BRACKET, CRANK DRIVEN RAW WATER PUMP GM 454/8.1/8.2

Bracket for Crank Driven Raw Water Pump (Johnson or Sherwood) GM 454, 7.4L/8.2L/8.1L 

BEARING HOUSING, PCM MODULAR R/W PUMP

2004 & up PCM Modular Raw Water Pump bearing housing assembly, 5.0L/5.7L/6.0L. Impeller sold separately Item # 2004203 2004 & up PCM Modular Raw Water Pump bearing housing assembly, 5.0L/5.7L/6.0L. Impeller sold separately Item # 2004203. Bin...

HOUSING IMPELLER BRASS PCM FORD G-21

THIS IS THE BACK HOUSING ONLY FOR THE PCM FORD G-21 SHERWOOD RAW WATER PUMP. O-RING SOLD SEPARATELY.

Water Strainer/Intake Grate

Water strainer/intake grate for bottom of boat. Metal thru hull intake for water, threads measure 1-1/4" Dia. X 2-1/2" H.  NOTE: THIS STRAINER/INTAKE IS THREADED non threaded ones are no longer available.