VALVE COVER GROUP

SEAL, VALVE (INTAKE) 5.0 & 5.7 VORTEC

Valve stem seal GM 5.0 & 5.7 1996 up Vortec cylinder head.   Bin Number (ISBN): 110412

Cylinder Head Gasket Ford 351 & 302 PCM & Indmar (sold individually)

Cylinder Head Gasket Ford 351 & 302 PCM & Indmar (sold individually) The same gasket for either head but one side must be flipped over for proper installation. Make sure to have the front marking pointed forward. When properly installed both...

VALVE PCV 305/350/SOME 351

Fits most GM 350/454 and Ford 302/351. 3/8" OD NIPPLE X 3/4" OD BARREL. Note: Not for PCM EFI GT40 (use Item # 12712). Replace when it does not rattle, indicating poor crankcase ventilation. Other indicators are excess oil or rough idle...

LIFTING EYE 302/351

Screws into the cylinder head on both ends for attaching chains (7/16" X 14" thread). Bin Number (ISBN): 200457

VALVE COVER GASKET SET 87+ GM SB

87 and up GM 305/350 with stamped steel center bolt valve covers. Sold per pair, Fel-Pro. Will not fit the Indmar plastic valve covers with o-ring type seal. Bin Number (ISBN): 12012

5/8 HOSE FORMED 90 DEGREE

The formed hose fits the breather to the flame arrestor. Bin Number (ISBN): 1707

PCV Valve GT-40

PCM Multi-Port EFI GT40 PCV Valve. Not for use with TBI - throttle body injection engines Replaces Indmar 50-5001 & Volvo Penta 3856215 PCM Multi-Port EFI GT40 PCV ELL - Type CV 774 C Replacement Positive Crank Ventilation (PCV valve) Bin Number...

CAP OIL FILL (SCREW DOWN)

Raised screw-down oil fill cap for Ford 1986+ Bin Number (ISBN): 1705

GASKET, CYLINDER HEAD GM 454 (330HP)

SOLD INDIVIDUALLY Marine gaskets are highly recommended over standard automotive gaskets for top efficiency, safety and performance! Minor wear, warpage and corrosion are a fact of life on marine engine surfaces. You can rely on marine gaskets to stand...

GASKET, ROCKER COVER 6.0L

Valve (rocker) cover gasket all 6.0L 2003 up.   Bin Number (ISBN): 10413

GASKET, HEAD (6.0L)

6.0L HEAD GASKET, 2003 and up. SOLD INDIVIDUALLY.   Bin Number (ISBN): 102812  

GASKET CYLINDER HEAD 305/350 GM

Sold individually, GM 5.7 head gaskets are non-directional (Not for LT1). Marine gaskets are highly recommended over standard automotive gaskets for top efficiency, safety and performance! Minor wear, warpage and corrosion are a fact of life on marine...

VALVE GRIND SET 351 FORD 86/LATER

* Includes PCM Riser & T-stat housing gaskets, head gaskets, intake set, valve cover gaskets, exhaust manifold gaskets, and valve stem seals for standard 240 hp and GT40 heads. * We can substitute Indmar gaskets upon request. * Will fit 86 and PRIOR...

GASKET, VALVE GRIND SET 351 (85 and prior)

1985 AND PRIORIncludes PCM Riser & T-stat housing gaskets, intake set, valve cover gaskets, 2 head gaskets, exhaust manifold gaskets and valve stem seals.   Bin Number (ISBN): 11617

Valve Cover Gasket Set GM 454

Standard 330 HP GM 7.4L/454 cid engines. 3 bolts up top and 4 bolts on bottom of cover. Sold per pair, Fel-Pro.   Bin Number (ISBN): 12612