Prop Puller Kits

HARMONIC PROP PULLER, G BOATS, 1-1/4 SHAFT

FOR G-BOATS WITH 1-1/4" SHAFT. Harmonic prop puller fits 1-1/4" shafts great for removing your inboard boats propeller with ease. most Nautique G boats have 1-1/4 inch prop shafts which this will fit.     Bin Number (ISBN): 51321

PROP WRENCH 1-1/4 X 3/4

Fits "CASTLE NUT" And ARE Puller   3/4" End fits A.R.E. IRONMAN Prop Puller.   Bin Number (ISBN): 81805

OJ PROP HARD CASE W/HARDWARE 15"

Prop Puller, Wrench, Nylock Nut, Cotter Pin, and Prop Key included.   OJ PROP HARD CASE W/HARDWARE 15" Perfect for keeping safe and keeping track of a spare propeller. OJ Prop Carrying case Hardware includes: Puller, wrench,...

ACME PROP PULLER, 1-1/4 C-CLAMP

2014 and up Nautique G-boats. This size is only for the Newer Heavy Ballast V-Drives   2014 and up Nautique G-boats. This size is only for the Newer Heavy Ballast V-Drives. Acme recommends Lucas X-tra heavy duty grease (or similiar) on the puller...

ACME SOFT CASE PROP SAVER W/C-CLAMP AND TOOLS

A must-have for your boat, this kit comes with everything you need to save a weekend on the water. Replace a damaged prop on the go with this weekend saver prop case from ACME.   Included in the kit: C-Clamp Prop Puller Needle Nose...

OJ PROP KNOCKER

Economical option to the traditional prop puller.Simply screw it on in place of your prop nut and give it a knock with a hammer. It will jolt the prop loose from the shaft. Then, unscrew the knocker and pull off the prop.Fits 1" and 1-1/8" shafts (not...

ACME PROP PULLER, C-CLAMP

Fits 1" and 1-1/8" shafts. Long-lasting durable material     This Acme C Clamp Prop Puller Fits 1" and 1-1/8" shafts. Acme recommends using Lucas X-tra heavy-duty grease (or similar) on the puller threads.   On...

Unique Prop Nut Wrench

What this wrench has to offer: - Install/Remove 7/8"-9 Prop Nut (1-1/4" Shaft) - Install/Remove 3/4"-10 Prop Nut (1" & 1-1/8" Shaft) - Install/Remove 1/2" NPT Drain Plug - Install/Remove 3/8" NPT Drain Plug - Threaded Docking Station for 1/2" Drain...

PACKING NUT WRENCH 1-7/8"

Fits Stuffing Box Locking Nut, Designed For V-drives But Works Great For All 1-7/8" Locking Nuts. Tip to tip length 6-1/2"     Aprox 6-1/2" total length, handle is aprox 4" long.   Bin Number (ISBN): 10107