Acme Propellers

ACME 4654 14.00" x 16.00" Wake/Ski 4-Blade Propeller

Diameter 14.00" Pitch 16.00" Cup .105" Hub Length 02.750" Bore 1.00" Blades 4 Rotation Right

ACME 3917™ 18.125" x 13.5" Wake/Ski 4-Blade Propeller

Diameter 18.125" Pitch 13.50" Cup .105" Hub Length 03.750" Bore 1.25" Blades 4 Rotation Left

13 X 12.5 (.105C) RH 4 BLD 1

Diameter: 13.00"Pitch: 12.50"Cup: .105"Hub Length: 02.750"Bore: 1.00"Blades: 4Rotation: Right   ACME 480 13.00" x 12.50" Right Hand Propeller 4-Blade   Bin Number (ISBN): 2004154

ACME 4059 15 X 15.25 LH SPLINED 4 BLD

ACME 4059 15 X 15.25 LH SPLINED 4 BLD

14.5 X 14.25 (.150C) 4 BLD, SPLINED

2003 Up Mastercraft Wakeboard/Surf/Cruise. More cup for less RPM than Acme # 1285. Approximately 200 RPM less at WOT, this is a better choice if you have to run some distance to get to your spot.Diameter: 14.50"Pitch: 14.25"Cup: .150"Hub length: Bore:...

14.5 X 14.25 (.105C) 4 BLD SPLINED

03 Up Mastercraft Wakeboard/Surf.Improved hole shot and fuel economy when running extra ballast. (1.5:1 Ratio Transmissions).Diameter: 14.50"Pitch: 14.25"Cup: .105"Hub length: 03.125"Bore: SplineBlades: 4Rotation: Left   Bin Number (ISBN): 10907

ACME 1593 14.50" X 16.00" PROPELLER 4-BLADE SPLINED LH

03 Up Mastercraft.Diameter: 14.50"Pitch: 16.00"Cup: .135"Hub Length: 03.125"Bore: SplineBlades: 4Rotation: Left   Bin Number (ISBN): 102211

ACME 847 13.50" X 17.50" PROPELLER 4-BLADE LEFT HAND

03 Up Mastercraft.Diameter: 13.50"Pitch: 17.50"Cup: .105"Hub Length: 03.125"Bore: SplineBlades: 4Rotation: Left   Bin Number (ISBN): 102011

ACME 845 13.50" X 16.00" PROPELLER 4-BLADE SPLINED LEFT HAND

Fits 03 Up Mastercraft.Diameter: 13.50"Pitch: 16.00"Cup: .105"Hub Length: 03.125"Bore: SplineBlades: 4 Rotation: Left   Bin Number (ISBN): 81908

ACME 843 13.00" X 12.00" SPLINED LEFT HAND PROPELLER 3 BLADE

03 Up Mastercraft, great all around performance. Ski, foot, tube, cruise, wakeboard (no ballast).Diameter: 13.00"Pitch: 12.00"Cup: .080"Hub Length: 03.125"Bore: SplineBlades: 3Rotation: Left   Bin Number (ISBN): 101911

ACME 1581 13.00" X 11.50" LEFT HAND PROPELLER 3-BLADE SPLINED

03 Up Mastercraft, more aggresive rpm good for high altitude or extra ballast.Diameter: 13.00"Pitch: 11.5"Cup: .060Hub Length: Mastercraft SplinedBore: 1-1/8"Blades:3Rotation: Left Hand   Bin Number (ISBN): 101811

ACME 644 OR POWERTECH F44 PROPELLER 13.25 X 16 (.105C) RH 4 BLD 1-1/8

Correct Craft V-Drive Super Air Team, 210, 220, 226 UP TO 2005.NOTE: The 2006 and newer 210 became a Left-Hand Rotation! It Uses Acme #645 along with 2007 up boats with PCM V-drive.Diameter: 13.25"Pitch: 16.00"Cup: .105"Hub length: 02.750"Bore: 1...

14.5 X 14.25 (.105C) RH 4 BLD 1-1/8

Correct Craft - Improved holeshot and better fuel economy when running extra ballast.Not For Nautique 210, Acme recommends #1578, 13.5 X 14.25 for hull clearance.Diameter: 14.50"Pitch: 14.25"Cup: .105"Hub length: 02.750Bore: 1.125"Blades: 4Rotation:...

13 X 15.5 RH 4 BLD 1-1/8

This works fine with a PCM 1.23:1 gear but would need a bore reducer for 1" shaft. Fits 1989 Fish Nautique with 1.23:1 gear. Nautique Exel with PCM 454 (will increase RPM about 400).Diameter: 13.00"Pitch: 15.50"Cup: .090"Hub length: 02.750"Bore: 1...

ACME 2561 OR POWERTECH BE61 17.00" X 17.00" PROPELLER 4-BLADE LEFT HAND

The ACME 2561 4 Blade 17" x 17" Propeller is designed for use on Nautique G-Series boats equipped with a 2:1 reduction v-drive and 1-1/4" prop shaft. This started in 2014 and was typically the ZR409 and ZR450 engines. The 550 Super Charged did...