Underwater-Gear/Steering

WEEKEND SAVER KIT FOR G-SERIES BOATS WITH 1-1/4" SHAFTS

WEEKEND SAVER KIT FOR G-SERIES BOATS WITH 1-1/4" SHAFTS   kits include a carry case for your ACME spare propeller, wrench, needle-nose pliers, c-clamp, cotter pin, key, and nut. Prop is not included.   Please note for the #5999 kit: There are...

BRACKET THROTTLE CABLE/CARB

BRACKET THROTTLE CABLE/CARB

5200 sealant by 3M - used to seal struts, fins, etc - 3 ounce tube

Used as a sealant in the installation of fins, struts, rudder ports, etc. Retains strength above or below waterline. Flexible; allows for structural movement. Effectively absorbs stress caused by shock, vibration, swelling or shrinking. Excellent...

OJ Evolution 4 Blade 18" X 13.5" LH Hub Propeller

PROP VERSION: EVOLUTION DIAMETER: 18" PITCH: 13.5” BORE: SPLINE ROTATION: LH CUP: .140" BLADES: 4

Packing Nut Wrench 2-1/2"

Packing Nut Wrench 2-1/2"

Prop Knocker for Inboard Boats (1-1/4" Shaft)- Harmonic Style Prop Remover

Prop Knocker for Inboard Boats (1-1/4" Shaft)- Harmonic Style Prop Remover

Prop Knocker for Inboard Boats (1" & 1-1/8" shaft)- Harmonic style Prop Remover

Prop Knocker for Inboard Boats (1" & 1-1/8" shaft)- Harmonic style Prop Remover

5" OUTPUT COUPLING BW 71/72C FINE SPLINE

5" OUTPUT COUPLING BW 71/72C FINE SPLINE

Trim Wake Plate Actuator Supra and others

This is a Bennett trim tab used on supra and other boats with adjustable wake plates/ ride plates please see pictures.    ****ONLY ONE AVAILABLE***

STRUT BUSHING 1-1/8 X 1-3/8

  * Sold per pair 2 bearings 2" long   Worn strut bearings increase vibration and cause additional wear to the drive shaft. Under normal operating conditions, strut bearings are replaced every 300 hours, more frequently in silty or sandy...

DRIPLESS WATER COOLING KIT FOR 1-1/4"

Kit includes  3/8 water line, hose clamps, and stainless t-fitting. Used when installing a dripless seal kit requiring cooling water and boat has 1-1/4'' ID water hose. Used on the pressure side of the raw water pump.  

OJ WakePro V3 4 Blade 15" x 13" LH 1 1/8" Propeller

OJ 945   PROP VERSION: WAKEPRO V3 DIAMETER: 15 PITCH: 13 BORE: 1-1/8" ROTATION: LH CUP: .120" BLADES: 4

ACME 3917™ 18.125" x 13.5" Wake/Ski 4-Blade Propeller

Diameter 18.125" Pitch 13.50" Cup .105" Hub Length 03.750" Bore 1.25" Blades 4 Rotation Left

Star Brite SILICONE SEALANT 2.8oz/ 100ML

Star Brite Brand marine sealant- 2.8oz/100ML bonds to fiberglass plastic, wood, glass, metal and more. For use above and below the water line. 

OJ LEGEND 14 X 16 LC 1 1/8" 3-BLADE

PROP VERSION: LEGEND DIAMETER: 14 PITCH: 16 BORE: 1-1/8" ROTATION: LH CUP: .090" BLADES: 3   ****NOTE: THIS IS A SPECIAL ORDER ITEM AND WILL TAKE A FEW DAYS TO SHIP