PCM 80 Series Parts

GASKET AND SEAL KIT PCM 80A 1.23

Includes All the gaskets and seals to rebuild the PCM 80A Series Transmission 1:23:1 OEM PCM/Velvet Drive,Velvet Drive Part Number: 3012420001

GASKET AND SEAL KIT PCM 80I 1:1

Includes all the gaskets and seals to rebuild the PCM 80I Series Transmission, inline 1:1. OEM Velvet Drive Part Number: 3003420001   Bin Number (ISBN): 12021

GASKET AND SEAL KIT (PCM 80S) V-Drive

Includes all gaskets and seals to rebuild the 80 Series PCM V-Drive. OEM Velvet Drive Part Number: 3004420002   Bin Number (ISBN): 10421

Overhaul Kit, Clutches ONLY BW 71/72C (and) PCM 80

Forward & Reverse Clutches C/O PCM 80 Series, Velvet Drive 71 & 72C transmissions (No gaskets or seals).       Forward & Reverse Clutches only.   Bin Number (ISBN): 21722

REVERSE CLUTCH KIT VD 71C & PCM 80 SERIES

Reverse clutch kit for all VelvetDrive 71C & PCM 80 series transmissions.   Keep your Velvet Drive 80 series transmission running smoothly with this reverse clutch kit

NEUTRAL SAFETY SWITCH NEWER STYLE 80'S +

O-Ring Sold Separately Item #1242. Recommended each time you replace NSS. Fits Velvet Drive, PCM & ZF Hurth transmission (will not replace older style switch Item #1246).   MARINE NEUTRAL SAFETY SWITCH. O-ring sold separately...

SEAL, OUTPUT (80A)

SEAL, OUTPUT (80A) 1.23:1

DIPSTICK PCM 80A 1.23:1 RATIO

DIPSTICK PCM 80A SERIES TRANSMISSION 2013 AND UP, FITS 1.23 RATIOS.

DIPSTICK PCM 80I & 80S 1:1 RATIO

FITS PCM 80 SERIES 80I & 80S TRANSMISSION 2013 AND UP. 

SPRING, PRESSURE PLATE 71/72C

Reverse pressure plate spring all 71/72C Velvet Drive. Length 1.21" (30.74 mm), diameter .29" (7.55 mm). These transmissions use 11 of these springs. There are 'holes' for 12, but the plate only uses 11.  Bin Number (ISBN): 200458

OIL SEAL, FRONT PUMP

BORG WARNER TRANSMISSIONS, known for their smooth, Velvet Drive, have been the industry standard for decades. The 71C and 72C designations indicate input horsepower ranges. Typically, a 71C is found on small blocks and a 72C is used on big block...

CLUTCH PLATE INNER REVERSE BORG WARNER

Friction (pressure) plate - quantity 2 needed, unless you have a 71-C with S/N 10-17-001 or 10-17-002 then you only need 1 (V.D. Part # 71-71). Also fits PCM 80 series.   BORG WARNER TRANSMISSIONS, known for their smooth, Velvet Drive, have been the...