PCM 40 Series Parts

DIPSTICK, PCM TRANS, NEW STYLE PLASTIC

This is the newer style (2010 up?) screw in plastic dipstick for the 40A 1.23 ratio. 6" long from end of dip stick to top of threaded part.     Bin Number (ISBN): 72612

DIPSTICK PCM 1:1

PCM 40i 1:1 RATIO, ( NOT FOR PCM 40a 1.23 RATIO)   Bin Number (ISBN): 22411

O'RING PUMP COVER PCM40

Sold individually, need 2.   Bin Number (ISBN): 101617

O'RING PUMP COVER (LG) ALL

Large o-ring front pump cover PCM 40 series transmissions   Bin Number (ISBN): 11906

OUTPUT FLANGE NUT FOR PCM 40A 1.23:1

Output Flange Nut For PCM 40A 1.23:1 transmission   Bin Number (ISBN): 1531

OUTPUT FLANGE NUT PCM 1:1

Get the output flange nut for your PCM 1:1 Transmission.   Bin Number (ISBN): 1530

SEAL OUTPUT PCM 1:1

Output seal for direct drive and 40 series when used with 2007 up PCM V-Drive. NOT for 40 series used with Walter V-drive (use Item # 31016).   PCM POWER PLUS TRANSMISSION REBUILD PARTS   Bin Number (ISBN): 1506

O'RING SEAL RET FLG (40-A)

This is the o-ring for the 1.23:1 ratio output seal retainer #107 in parts book. Bin Number (ISBN): 10218

SEAL FRONT PUMP COVER PCM 40

SEAL FRONT PUMP COVER 40A Input seal PCM 40 I and 40 A transmission. Some customers also order a new large O-ring for the pump cover PT# R047187 and 2 small ones for the bolts R047186.   Bin Number (ISBN): 1505

Seal Rear Flange (40-A) 1.23:1 R047191

Seal Rear Flange (40-A) 1.23:1 R047191 Note: You should not have to drain the case because of the case design. The sump is lower than the seal. 1) Remove the main shaft nut. 2) Remove coupling. 3) Pop out seal with a screwdriver, similar to front seal...

SEAL,OIL-REAR OUTPUT S/D, V/D PCM 40

Seal for PCM 40 I (1:1 ratio) transmissions using Walter V-Drive. NOT for 40 series used with pcm V-drive use Item # 1506.   Bin Number (ISBN): 31016

GASKET/OIL SEAL KIT (40A & 40I) ALL

1.23:1 ratio and 1:1 ratio. PCM POWER PLUS TRANSMISSION REBUILD PARTS   Bin Number (ISBN): 1504

NEUTRAL SAFETY SWITCH NEWER STYLE 80'S +

O-Ring Sold Separately Item #1242. Recommended each time you replace NSS. Fits Velvet Drive, PCM & ZF Hurth transmission (will not replace older style switch Item #1246).   MARINE NEUTRAL SAFETY SWITCH. O-ring sold separately...

GASKET, PCM 40 CASER ADAPTER

GASKET FOT THE FRONT CASE TO REAR HOUSING