Hurth ZF

FILTER, HURTH C/O V DRIVE

Fits Hurth ZF HSW series tranmissions. Includes 2 o-rings. This is an Alto brand kit that cross references a ZF/Hurth #463722.   Bin Number (ISBN): 51018

HURTH ZF 63 A (HSW 630A) INLINE TRANSMISSION 1.22:1

Direct drive, 8 degree down angle Hurth ZF 63 A (HSW 630A) Inline Transmission 1.22:1   Bin Number (ISBN): 110112

ZF 63 IV (HSW 630 VI) V-DRIVE

1.56 ratio 12 degree V-drive C/O MASTERCRAFTS with 5.7L or 6.0L engines (SHIPS TRUCK FREIGHT). Mechanical shift only (must use a control cable).This is a 1.56 ratio usually used in Mastercraft V-drives boats. Call or email for availabilty of 2:0 or 2.5...

SCREW IN DIPSTICK, HURTH 450 650, ZF 45 & 63 - 90-3064

Screw-in Style Fits Hurth 450 and 630, ZF 45 and 63 Transmissions with screw-in dipsticks     Bin Number (ISBN): 11520     **THIS IS A SPECIAL ORDER ITEM**

FITTING 90 DEGREE, 1" NPT X 1-1/4" WALTER V-DRIVE

Walter V-drive water hose in/out  You need 2 per engine.     Bin Number (ISBN): 31522

HURTH 630A TRANSMISSION INLINE 1.56:1

Direct drive, 8 degree down angle - Hurth ZF 63 A (HSW 630A) Inline Transmission 1.56:1

DAMPER PLATE 8.1L & 6.0L HURTH/ZF

Heavy duty damper plate, 8.1L and 6.0L engines with Hurth/ZF transmissions. Mastercraft Only.   Bin Number (ISBN): 40212

DAMPER PLATE, GM 5.7, 5.0L HURTH/ZF

GM Small Block with ZF Hurth Transmissions (Heavy duty). This damper raises the mounting bolts heads about 1/4" and Indmar bellhousings may have to be ground slightly for clearance.Hurth V-drive only, not for ZF45 (HSW 450 D) use Item # 1516.   Bin...

MASTER OVERHALL KIT 630 V DRIVE

Master overhaul kit includes all gaskets and seals and clutches to rebuild a Hurth 630V, and ZF 63IV transmissions.   Bin Number (ISBN): 61721   OLD PART# 316907V

GASKET AND SEAL KIT HURTH/ZF 630 IV 316807AB

Replacement gasket and seal kit for Hurth 630v and ZF 63 IV transmission. 316807AB - Gasket and Seal Kit Hurth/ZF 630 IV   Bin Number (ISBN): 30321

ZINC, HURTH SKI V TRANS

2007 UP INDMAR SKI V TRANSMISSIONS, SOLD INDIVIDUALLY (2 REQUIRED).   Bin Number (ISBN): 91211

SEAL INPUT 450A/C/D/630V HURTH

Seal input 450A/c/630V Hurth fits 45C 1:1

HURTH 630 V TRANSMISSION MOUNT W/BRACKET (RIGHT)

Hurth 630V Transmission Complete Mount Kit With Bracket and Hardware. This is the right Side ONLY.     **THIS IS A SPECIAL ORDER ITEM**

HURTH 630 V TRANSMISSION MOUNT W/BRACKET (LEFT)

Hurth 630V Transmission Complete Mount Kit With Bracket and Hardware. This is the Left Side ONLY.