Damper Plates

DAMPER PLATE, PCM 40 SERIES FORD/GM

Use with PCM 40A (1.23:1 ratio) and 40I (1:1 ratio) transmissions. Ford 302 & 351, GM 5.0L, 5.7L and 6.0L engines. The PCM 40 has a 15 spline input shaft. Superceeds PCM Pt. #R140016A.   Bin Number (ISBN): 31011

BOLT, FLYWHEEL DAMPER FORD

 (5/16-18 X 3/4 Sholder Bolt). Six bolts are required. You can re-use the old bolts, fits Ford 351 & 302     **INCLUDES FLATS WASHER AND LOCK WASHER   Bin Number (ISBN): 1520

BOLTS, DAMPER ALL GM

These bolts fit older standard thread flywheels, 3/8-16 X 1". There was a change to a metric thread but we are not sure of the year 2002 up? WILL NOT FIT INDMAR LT1.   Bin Number (ISBN): 1519

DAMPER DRIVE PLATE BW FORD/80 SERIES FORD

Borg Warner Velvet Drive damper plate for 1:1 and 1.52:1 transmissions. Features a 26 spline input shaft. Due to vendor changes, the new replacement dampers may be a different shape than the original.   Nothing Special about the damper...

DAMPER PLATE 8.1L & 6.0L HURTH/ZF

Heavy duty damper plate, 8.1L and 6.0L engines with Hurth/ZF transmissions. Mastercraft Only.   Bin Number (ISBN): 40212

DAMPER PLATE 6.0L, 6.2, 5.3L

Also fits H5 and H6 Direct Injected engines.   Fits PCM 80 series, Hurth and Velvet Drive transmissions with 26 spline input shaft. Will NOT fit older PCM 40 series transmissions, use Item #31011.   Bin Number (ISBN): 41018

DAMPER PLATE, GM 5.7, 5.0L HURTH/ZF

GM Small Block with ZF Hurth Transmissions (Heavy duty). This damper raises the mounting bolts heads about 1/4" and Indmar bellhousings may have to be ground slightly for clearance.Hurth V-drive only, not for ZF45 (HSW 450 D) use Item # 1516.   Bin...

DAMPER PLATE, GM, PCM 80 SERIES, ZF & VELVET DRIVE

GM 5.7 (350) & 7.4L (454) with PCM 80 series, Hurth/ZF and Velvet Drive transmissions. Will fit direct drive or V-drive applications. Good for up to 550 HP.     GM 5.7 (350) & 7.4L (454) with PCM 80 series,...

DAMPER DRIVE PLATE GM SMALL BLOCK

GM 5.0L/305, 5.7L/350 with Borg Warner Velvet Drive and Hurth 450D/ZF45D transmissions with 26 splines (Manufactured by Sach's). Standard plate recommended for direct drive ski boats. Heavily weighted boats should consider Item #12815. This triangular...