Borg Warner 1.52:1 (Velvet Drive)

DIPSTICK, INDMAR V-DRIVE (YELLOW)

DIPSTICK FOR INDMAR V-DRIVE (VELVET DRIVE YELLOW)

NUT MAIN SHAFT 1.52:1 RATIO

5" OD COUPLER, NOT RECOMMENDED TO REUSE THIS NUT. THIS IS FOR 1.52:1 REDUCTION GEARS.     Bin Number (ISBN): 1431

FWD & RVRS SHIFT LEVER

Forward & reverse shift lever 71 & 72C   Velvet Drive 71 & 72C forward & reverse shift lever (all ratios).

SEAL OUTPUT SHAFT, 1.52

SEAL OUTPUT SHAFT, 1.52   Bin Number (ISBN): 1408

Gasket Bearing Retainer W/ Gasket RM0012

Output bearing retainer gasket 1.52 reduction gears.   Bin Number (ISBN): 40718

VELVET DRIVE 1.52:1 (72C) NEW

The 72C replaces the 71C that is no longer available. It is 9/10th's of 1 inch longer than the 71C and may require shortening of the drive shaft on some boats. *Warranty is void without a new or recently replaced oil cooler. 72C (1.52:1) Ships by truck...

Master Overhaul Kit, Velvet Drive 71C & 72C

Complete rebuild kit includes all seals, forward & reverse clutches and gaskets for 10-17 (71C) & 10-18 (72C) Velvet Drive transmission. All ratios 1:1, 1.52:1, 1.91:1, 2.57:1 and 2.91:1. Output coupler nut sold separately. Complete rebuild kit...

Gasket & Seal Kit, Velvet Drive 71C & 72C

Gasket and seal kit all Velvet Drive 71C (10-17-000) & 72C (10-18-000) direct drive transmissions (all ratio's). Includes all the gaskets and seals for a complete teardown and re-seal, full rebuild kit also available here get your rebuild kit today!...

Clutches ONLY Velvet Drive 71C, 72C & PCM 80

Forward & Reverse Clutches C/O PCM 80 Series, Velvet Drive 71 & 72C transmissions (No gaskets or seals).       Forward & Reverse Clutches only.   Bin Number (ISBN): 21722

REVERSE CLUTCH KIT VD 71C & PCM 80 SERIES

Reverse clutch kit for all VelvetDrive 71C & PCM 80 series transmissions.   Keep your Velvet Drive 80 series transmission running smoothly with this reverse clutch kit

GASKET NEUTRAL SWITCH COVER

GASKET NEUTRAL SWITCH COVER PLATE.   Bin Number (ISBN): 11006

O'RING, VELVET DRIVE 71 & 72c SHIFT VALVE

Comon cause of a fluid leak at the shift lever.Shift valve must be removed for replacement, order Item #11006 NSS gasket.     1. REMOVE 3 BOLTS ON THE NSS. 2. REMOVE SHIFTER ARM. CAREFUL OF THE BALL AND SPRING BEHIND IT. 3. PUSH THE CONTROL...

NEUTRAL SAFETY SWITCH NEWER STYLE 80'S +

O-Ring Sold Separately Item #1242. Recommended each time you replace NSS. Fits Velvet Drive, PCM & ZF Hurth transmission (will not replace older style switch Item #1246).   MARINE NEUTRAL SAFETY SWITCH. O-ring sold separately...

O'RING NEUTRAL SAFETY SWITCH

For Use With Item # 1241 Penny for size comparison.    Bin Number (ISBN): 1242

SPRING, PRESSURE PLATE 71/72C

Reverse pressure plate spring all 71/72C Velvet Drive. Length 1.21" (30.74 mm), diameter .29" (7.55 mm). These transmissions use 11 of these springs. There are 'holes' for 12, but the plate only uses 11.  Bin Number (ISBN): 200458