Borg Warner 1:1 (Velvet Drive)

BORG WARNER 1:1 71C GEAR

This is a NEW transmission not Rebuilt. The 71C (10-17-XXX) is normally used with GM or Ford small block engines. 4" Diameter output shaft coupler and 26 splined input shaft. Uses Dexron III trans fluid. Pump is indexed for LH rotation, we can...

BORG WARNER 1:1 72C GEAR

This is a NEW 72C (10-18) transmission for 454 Big Block applications, 5" output coupler.  Factory warranty void without a new or recently replaced cooler.

Overhaul Kit, Clutches and Seals BW 71/72C

Complete rebuild kit includes all seals, forward & reverse clutches and gaskets for 1017 & 1018 Velvet Drive transmission. All ratios 1:1, 1.52:1, 1.91:1, 2.57:1 and 2.91:1. Output coupler nut sold separatley. Complete rebuild kit includes all...

VELVET DRIVE GASKET AND SEAL KIT VELVET DRIVE 71C & 72C

Gasket and seal kit all 71/72 C transmissions.   Includes all the gaskets and seals for the PCM 71C and 72C transmission. Get your velvet drive transmission rebuild kit today!   Bin Number (ISBN): 51118

Overhaul Kit, Clutches ONLY BW 71/72C (and) PCM 80

Forward & Reverse Clutches C/O PCM 80 Series, Velvet Drive 71 & 72C transmissions (No gaskets or seals).       Forward & Reverse Clutches only.   Bin Number (ISBN): 21722

REVERSE CLUTCH KIT VD 71C & PCM 80 SERIES

Reverse clutch kit for all VelvetDrive 71C & PCM 80 series transmissions.   Keep your Velvet Drive 80 series transmission running smoothly with this reverse clutch kit

GASKET NEUTRAL SWITCH COVER

GASKET NEUTRAL SWITCH COVER PLATE.   Bin Number (ISBN): 11006

O'RING, VELVET DRIVE 71 & 72c SHIFT VALVE

Comon cause of a fluid leak at the shift lever.Shift valve must be removed for replacement, order Item #11006 NSS gasket.     1. REMOVE 3 BOLTS ON THE NSS. 2. REMOVE SHIFTER ARM. CAREFUL OF THE BALL AND SPRING BEHIND IT. 3. PUSH THE CONTROL...

NEUTRAL SAFETY SWITCH NEWER STYLE 80'S +

O-Ring Sold Separately Item #1242. Recommended each time you replace NSS. Fits Velvet Drive, PCM & ZF Hurth transmission (will not replace older style switch Item #1246).   MARINE NEUTRAL SAFETY SWITCH. O-ring sold separately...

O'RING NEUTRAL SAFETY SWITCH

For Use With Item # 1241 Penny for size comparison.    Bin Number (ISBN): 1242

SPRING, PRESSURE PLATE 71/72C

Reverse pressure plate spring all 71/72C Velvet Drive. Length 1.21" (30.74 mm), diameter .29" (7.55 mm). These transmissions use 11 of these springs. There are 'holes' for 12, but the plate only uses 11.  Bin Number (ISBN): 200458

OIL SEAL, FRONT PUMP

BORG WARNER TRANSMISSIONS, known for their smooth, Velvet Drive, have been the industry standard for decades. The 71C and 72C designations indicate input horsepower ranges. Typically, a 71C is found on small blocks and a 72C is used on big block...

REAR OIL SEAL (71C/72C) 1:1 RATIO

REAR OUTPUT SEAL 1:1 RATIO VELVET DRIVE   Bin Number (ISBN): 1407

SPEEDY SLEEVE INPUT SHAFT 71 & 72C

Repairs damaged input shafts where the seal rides.   Bin Number (ISBN): 50218

CAP BREATHER ASSEMBLY

A vent in case of an overflow caused by overfilling.     Breather cap for Velvet Drive transmissions. Fits 71C, 72C and 5000 series transmissions  Replaces OEM Pt # A47406 Replaces Crusader # 1012714   Bin Number...