Product Description
PerTronix "Ignitor II" Electronic Ignition conversion kit for the Prestolite clip down cap and screw-down cap.
Works great in stock point-type distributors as a trigger for multi-spark CD ignitions
Lobe Sensor Solid-State, Hall Effect, Negative Ground, 12 V
Minimum coil resistance 0.6 ohms
Maximum Coil resistance 3.5 ohms (no resistor required)
Most coils will work with this conversion, you can also get the PerTronix Flame-Thrower II coil here Pertronix Coil.
PERTRONIX IGNITOR II CONVERSION KIT CLIP & SCREW DOWN POINT CONVERSION
Senses current levels in the coil and adjusts the dwell to maintain peak energy through the entire RPM range. Dwell time is increased or decreased with changing engine RPM and operating conditions. This provides more energy at high RPM, reducing misfires while improving marine engine performance.
Fits entirely inside the distributor with no black box to clutter your engine compartment.
Recheck base timing after install, spark plug gap now .040
