Inboard Rudder Assembly Drop Arm Tiller
For V-drives with drop-down tiller arm (drops down 1"). 4" X 4" rudder port flange (slotted bolt holes) and 2" O.D. port. This rudder will have RTPL cast on it and is 14" long. There is a RTPN casting that is only 12.50" long. This can replace it if there is enough room to the trailer guard.
This measures 4" from the base plate which bolts to outside of the hull to the top of the rudder port below the tiller arm. Then, tiller arm height is additonal 1 1/4.